6 AWG Two Hole Side Bristol Type Mechanical Connector

Code: 3CM3BL2006

Two-hole Bristol type connector for grounding systems 6 AWG

$16,265$81,323

Available on backorder
Clear

Description

MATERIALS

Body in Copper with Screws and accessories in Bronze

CHARACTERISTICS
  • Primarily designed to connect two cables horizontally to a flat surface.
  • Hex set screw allows for reliable fastening of the conductor to the connector.
  • Easy installation with tools such as fixed or adjustable wrenches.
  • Made of high conductivity brass
  • It can be installed directly on earth or concrete.
  • Copper-copper connections (Cu-Cu).
  • The connector is finished free of defects in order to facilitate the entry of the cable and avoid possible damage to the conductor during insertion.
  • The connectors are clearly marked with the manufacturer’s brand, gauge range and reference in its technical data sheet.
  • Provides low resistance and excellent electrical conductivity.
  • Heavy-wall construction prevents loosening of a joint after installation.
APPLICATION

Compression connectors are part of a grounding system that uses tools or wrenches during installation to make the connections firm, robust and of high quality. These connectors are characterized by creating mechanical unions, through screws, nuts or clamps that secure the conductor(s) in a parallel or perpendicular way depending on the type of connector and the design of the installation, since these elements will be used directly on the ground or concrete. Finish free of defects and without sharp surfaces that could affect the driver.

NORMATIVITY

This product is made under the applicable standards established by the Colombian Technical Standard NTC 2206, NTC 2050 and the RETIE Electrical Installations Technical Regulation.

CERTIFICATION

Compliance with resolution 90708 of August 30, 2013 of the Ministry of Mines and Energy. Technical Regulation of Electrical Installations RETIE: 2013 Chapter 2, Article 15.1.C, under the certification CSR-CER526746 of ICONTEC. Compliance with the NTC 2206 connection and grounding equipment standard, under the ICONTEC CSC-CER526744 certification.

Additional information

Weight 0.037 lbs
Dimensions 3 × 1.73 × 1.7 cm
Packaging unit

,

Screw hole ØT (in)

Wire hole ØC (mm)

High - L ± 1(mm)

Width - W ± 0,5 (mm)

Large - H ± 1 (mm)

Conductor gauge